Description
Enmach 35L poly water tank including mounting kit PRV35-HB-MK.
- Headboard tank with mounting kit
- Roto moulded polyethylene – Food grade
- 1/2” bsp Breather Thread, 3/4” bsp Outlet Thread, 2” Inlet Cap
- Approximate usable storage – 35 Litres
- Cutout size: 40mm Deep x 285mm Wide. 155mm From Edge
- Size: L x 1400mm, W x 75mm, H x 450mm
Filling & Fitting Instructions:
Drill and bolt mounting angles supplied to tray or suitable vertical surface at the right width and fix tank to angles using bolts supplied.
This tank is not to be pressure filled from a hose that is connected from mains pressure to the tank that has a larger flow rate than the breather. Doing so will cause the tank to inflate and split and will void warranty.
We recommend to use plastic/nylon fittings in this tank not brass.
The stated litre capacity is by cubic measurements and is a guide only. Usable litre capacity is determined by the way the tank is mounted.
TANK MUST BE FLUSHED BEFORE INITIAL USE
Reviews
There are no reviews yet.