Description
Enmach 25L poly water tank PRV25.
- Under body tank
- Roto moulded polyethylene tank
- Moulded recess with pump bottle included
- 1/2″tap
- Cap mounted breather
- Mount by bolting through 4 x 11 mm moulded holes
- Avaliable in grey and black
- Approximate usable storage – 25 Litres
- Size: L x 470mm, W x 200mm, H x 450mm
Filling & Fitting Instructions:
Align mounting flanges on tank with a sturdy surface on your vehicle i.e chassis rails, mark holes and drill. Fasten using bolts and flat washers. NB: Do not drill plastic holes larger This tank is not to be pressure filled from a hose that is connected from mains pressure to the tank that has a larger flow rate than the breather. Doing so will cause the tank to inflate and split and will void warranty. We recommend to use plastic/nylon fittings in this tank not brass. The stated litre capacity is by cubic measurements and is a guide only. Usable litre capacity is determined by the way the tank is mounted.
TANK MUST BE FLUSHED BEFORE INITIAL USE
Reviews
There are no reviews yet.