35L Headboard Poly Water Tank with Mount Kit PRV35-HB

Description

Enmach 35L poly water tank PRV35-HB.

• Headboard  tank only
• Mount kit optional
• Roto moulded polyethylene – Food grade
• 1/2” bsp Breather Thread, 3/4” bsp Outlet Thread, 2” Inlet Cap
• Approximate usable storage – 35 Litres
• Cutout size: 40mm Deep x 285mm Wide. 155mm From Edge
• Size: L x 1400mm, W x 75mm, H x 450mm

Filling & Fitting Instructions:

This tank is not to be pressure filled from a hose that is connected from mains pressure to the tank that has a larger flow rate than the breather. Doing so will cause the tank to inflate and split and will void warranty.

We recommend to use plastic/nylon fittings in this tank not brass.

The stated litre capacity is by cubic measurements and is a guide only. Usable litre capacity is determined by the way the tank is mounted.

TANK MUST BE FLUSHED BEFORE INITIAL USE