Melbourne Trailers 3 Tonne Bearing Kit

Description

Melbourne Trailers 3 tonne bearing kit.

Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.

In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer) is called the inner bearing.

The bearing on the outside is called the outer bearing.

Melbourne Trailers 3 tonne bearings are supplied as either Japanese or German brand bearings, lower quality Chinese or Indian bearings are never supplied in Melbourne Trailers bearing kits.

Melbourne Trailers 3 tonne bearing kit includes:

• 1 x Bearing – 30210
• 1 x Set 70 bearing – 29749 cone & 29710 cup (29749/10)
• 1 x Standard seal 2.375″ x 3.540″ x 0.500″
• 1 x Split pin M6 x 63mm zinc

Optional extras:

• Dust cap 76mm